1st Gen. Lunch Table - General Discussion

Bro you gotta do @shifty` then convince him to do a pic change

 

Looks like random unskined deer parts

 

Oh, I'd totally do it if it was cool enough and worked in such a tiny format.

 

I just cropped down the face section and then expanded it till the site was like ok this is fine lol. I was trying to get the moon in mine but nooooo stupid small pixel allowance

 

I feel like you could probably use the one you've got as a seed image, then ask AI to put a TX flag behind it.

 

Jesus AI is on point today

 

What about the kid on the right in the third one. Who’s arm is on his shoulder?

 

Who was it that made a timing belt belt? @JakeJake @metalpete ? Search sucks in this instance

 

Not me. I do remember seeing it. "timing belt belt" only gets you so far in the search

Best I can do:
https://www.instructables.com/A-Timing-Belt-Belt/

 

@RUSTYNUTS

https://www.tundras.com/threads/wha...-gen-tundra-today.2558/page-1783#post-3414244

 

That's the one! Thank you!

 

@MustyGuts

 

Not my best work, but they're at least average good to low serious fabricator quality welds.

That and this Miller Matic MiG unit hasn't been service since they bought it 4 years ago. The filler metal sheath is just fucking filthy. Not excuses, just statements of fact

 

I need to learn how to weld. The amount of money it would save me is unreal.

 

I cleaned some of the shit out of the machine, and this is what I'm getting now.

 

Don’t you dress your welds?

 

flux125 from the freight. Dirt cheap and gets it done. Unless you wanna go with gas. But truthfully flux core sticks metal together and is a cheap starting option while till being able to make structurally sound toys

 

still some porosity. Kinda odd for MIG

edit: it actually just looks like porosity where you start/stop. You bringing that back a bit before letting off the tiger?

 

this guy is the absolute best.
the playlist:
https://youtube.com/playlist?list=PL1jBezCa9PIwPo2VXbFFVUJ8N8JRMHSOW&si=pkdWhuoNXVh3HPDn

https://youtu.be/bYoNiUfPgF4?si=XIwlRrJrivg7H7do

 

If it was critical structural I would immediately. But seeing as this for a pig feeder I'll do it after it's all welded. Just a wire wheel, no chemical dressing.

 

if @shifty` built a trailer.
https://youtu.be/uj1V1wlL0eI?feature=shared
I could do with a bagged trailer.

 

Whelp after an hour of diagnosing cleaning fixing and replace parts I got the MiG back up and running at work. Had to grind a weld out for the first time since 2015 when I was in advanced weld school for the Navy, 4955 for fucking life. Don't know what the issue was, but it was shorting the wire feed and pulse arcing. It's not supposed to do either of those things.

Oh and I forgot my cover gas on a test weld. But for no gas that root was fucking mint.

 

Much better

 

Yeah they're even better now that I fucked with the wire speed. What ever was causing that binding had been there for a minute cause they had it cranked all the way up, and it never seemed as fast I remember. That "good" weld was me trying to keep up with the wire speed after the cleaning. They look as they should now.

 

Back in 15 I did these for a project, but our welder was old AF and the lead was clapped out so bad it had to be laid out in a gentile loop or the feed was horrible. Armature hour for sure, but I love using the welder.

 

Easy fix a new liner and feed Paul's with a new tensioner spring would have done you right

 

Fucking dialed

 

Looks like the gas feed wasn't good maybe, I have forgotten to turn it on and it's way worse than that spittersputter though.
Can you get a decent used MIG (that needs some love) for $500-700, It's on my list of post retirement wants. Recommend a brand?

 

For the money, the Harbor Freight Titanium ones are a fine machine.